|
Ellie's
Treasures Paint Shop Pro Translated Tutorials -
Faith Tag http://www.ellies-treasures.com/marianslessen/faith-psp/faith-psp.html |
|
|
|
For this tutorial you will
need: Jasc or Corel PSP I've done this tutorial in PSP 9 and PSP XI. I believe it can be done in most versions.  Filters and materials needed No 3rd party filters needed, all native psp filters used Supplies in zip file here. http://www.ellies-treasures.com/files/tuts/faith-supplies-psp.zip Supplies in zip file here for older versions if the other ones don't work for you. These are in psd format. http://www.ellies-treasures.com/files/tuts/faith-supplies-psd.zip Due to copyright issues, the frame tube (the frame around the woman's face) had to be removed from the supplies, so be creative and choose your own! You know you can do it! LOL ************* From Marian The tubes which I have used are of Alejandra Rosales and several scrap tubes. * Have respect for the tubers and leaves them in their original state. Important!!! Please read carefully!!! * The scrap tubes used in this tutorial are bought by me personally. You may use these scrap tubes for this tutorial, and for your personal use. You may not offer these tubes for sale, trade, sharing, your own tutorials, or commercial purposes. Read carefully the conditions and term or the scrap designers, otherwise I will have to stop writing scrap tutorials!!! Thanks for your cooperation. ************* I am assuming you know the basics of Paint Shop Pro and where the tools can be located. |
| I like to open all of my tubes at once and close as I use them. None of these tubes are used more than once. Save my tag at the top of the page and keep it open while working for reference, I find this helps a lot. Put the goldenbeads pattern in your pattern folder. Font used for tag is included in the zip file. Either install the font or double click it to open it. If you open before you open PSP it will be available to use in the program as long as you leave the font open. |
| Step 1 Open a transparent image of 620x460 pixels. Selections - select all. Open "Fa-Achtergrond_01", copy (control-C) making sure you are in the tube layer, and Edit>Paste into the selection. Deselect. |
| Step 2 Open "Fa-Achtergrond_02", copy and paste as new layer (control-L) Pull it under layer 1 in the layer palette (left click on it and pull down) Select raster 1 Turn on your ruler (View>Ruler) Move Raster 1 (the beige floral) to the left, as shown, to the 350 pixel mark along the top |
| Step 3 Open tube "Fa-Ribbon_01", copy and paste as new layer Move it on the light part so it's against blue-green background of raster 2. Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 80, Blur 3. Repeat with H -1 and V -1. |
| Step 4 Open tube "Fa-Overlay",copy and paste as new layer Reduce layer opacity to 60. Layers (or right click in layer palette)>Merge all (flatten), so that nothing will shift on you. |
| Step 5 Open tube "Fa-Ribbon", copy and paste as new layer Move it to the bottom as shown. Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 80, Blur 3. Repeat with H -1 and V -1. |
| Step 6 Layers - Duplicate Image - mirror |
| Step 7 Open tube "FA-stitching" - copy and paste as new layer Move it to the left, as shown. |
| Step 8 Layers - Duplicate Image - mirror. |
| Step 9 Open tube "Fa-Rope", copy and paste as new layer Move to the right, see my example. |
| Step 10 Open tube, "FA-flowerchain" copy and paste as new layer Move it up, as shown Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 80, Blur 3. Repeat with H -1 and V -1. Reduce opacity of this layer to 60. |
| Step 11 Open tube, "FA-ribbon with buckle" - copy and paste as new layer Move it to the bottom as shown. Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 80, Blur 5. Repeat with H -1 and V -1. |
|
Step 12 Open tube "Fa-Flower" copy and paste as new layer Move these in your layer palette under the rope layer. Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 80, Blur 5. Repeat with H -1 and V -1. |
|
Step 13 Open tube "Fa-Flower_01", copy and paste as new layer Move these in your layer pallet under previous flower. |
|
14. Activate upper layer. Open your frame tube, copy and paste as new layer Move it down a bit. Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 60, Blur 20. Repeat with H -1 and V -1. For steps 15 & 16, you may have to adapt a bit depending on the frame and frame size you picked. |
|
Step 15 Open a transparent image of 300x240 pixels. foreground color on #cec2a2, background color on #5d6c67 Make a gradient, settings: linear, angle 45, repeats 0, invert checked Fill image with this gradient using your flood fill tool. |
|
Step 16 Open tube "516 woman with hat ABR 313.Alejandra Rosales-25-8-06", reduce it to 60% bicubic, Image>mirror. copy and paste as new layer on your gradient canvas |
|
Step 17 Layers - merge all layers |
|
Step 18 Copy and paste this image as a new layer in your working canvas Move this layer under the frame layer in the layer palette and move it in the canvas so it's behind the frame. Take notice of the bottom left of the frame, make sure you move the woman picture up enough so that the corner of it disappears. Activate the upper layer. Layers - merge down. This will merge the woman and the frame only. |
|
Step 19 Open tube "FA-fastener", copy and paste as new layer Move it to left as shown. Image>Rotate>Free rotate>Left 8 degrees, all layers not checked Effects>3D Effects>Drop Shadow H 1 and V 1, Opacity 80, Blur 2. Repeat with H -1 and V -1. Adjust>Sharpness>Unsharp mask Radius 1, Strength 64, Clipping 4. |
|
Step 20 Open tube "FA-Pin", copy and paste as new layer Move this over flower, as shown Image>Rotate>Free rotate>Right 8 degrees, all layers not checked. Adjust>Sharpness>Unsharp mask Radius 1, Strength 64, Clipping 4. |
|
Step 21 Making sure you are in the background layer, select the left part of the background as shown, from the edge to just to the right of the stitching. Go to Adjust>Brightness and contrast and change brightness to 20, contrast to 26. Deselect. Check if all tubes are in the right place Layers>Merge all (flatten). |
|
Step 22 Image>Add border - 5 pixels white, symmetric checked. Select with magic wand, anti-alias on, tolerance on 0. Fill with the gradient that is still in your foreground color box. Effects>3D Effects>Inner Bevel, settings. Bevel 2-2-10-2-1-10-315-40-33-white |
|
Step 23 Image>Add border - 3 pixels white, select with magic wand - anti-alias on, tolerance on 0. Change your foreground color to pattern. Find in your material palette the pattern Goldenbeads. Angle 0, scale 100. Fill the selection with that pattern. Effects>3D Effects>bevel as before: Bevel 2-2-10-2-1-10-315-40-33-white |
|
Step 24 Image>Add border - 36 pixels, color #5d6c67 (dark blue grey), select with magic wand anti-alias on, tolerance on 0. Effects>Texture Effects>Blinds, settings: 4-40-color #d5d0b0 (medium taupe), Horizontal and light from left/top both checked Repeat with horizontal unchecked. Leave selected Effects>3D Effects>Inner bevel, settings: Bevel 1-1-10-1-1-10-315-40-33-white |
|
Step 25 Activate text tool. Put some text or your name on the label. foreground color to null (turn it off), background color #888362 (a dark taupe color), vector, AmoreATT, size 22, stroke width 1, anti-alias sharp. Effects>3D Effects>Drop shadow:1-1-80-2-black Then Adjust>Brightness and contrast, change brightness to 20 and contrast to 50 Layers - merge all layers and save as jpg. Your scrap is ready!! |
|
Resizing To resize, make sure, to retain the texture and the clarity, resize at 90% bicubic and repeat till you get close to the size you want. At that point you can resize by pixels as usual. You will find this makes a big difference in your final result. If you resize, use the unsharp mask or Brightness/Contrast to sharpen it a bit. Adjust>Sharpness>Unsharp mask at Radius 1, strength 60, clipping 4. or Adjust>Brightness and Contrast set to Brightness of 5-contrast of 15. |
|
Watermark and Save Layers>New raster layer. Add your water mark on this new layer Layers>Merge>Merge all (flatten) Save: File>Export>Jpeg optimizer - compression of 20. |
| If you have any questions or suggestions, email me here: http://www.ellies-treasures.com/email/email.html |
| Translation done June 16, 2007 and revised Feb 25, 2008 * * * These tutorials are translated with permission from the original writer. Any resemblance to any other tutorial is purely coincidental and unintentional. Feel free to share any of my tutorials on this site by a link back to my site, but do not copy and send the entire tutorial to anyone or any group. ©2003-2008 Ellie's Treasures |
