|
Ellie's
Treasures Paint Shop Pro Translated Tutorials - Violette's Scrap Rosalinde Tag http://www.ellies-treasures.com/violette/scrap-rosalinde/scrap-rosalinde.html |
|
|
|
For this tutorial you will
need: Jasc or Corel Paint Shop Pro. I've done this tutorial in PSP 9 and PSP XI. I believe it can be done in most versions. You may have to look around for the commands but it's likely they are there.  Filters and materials needed No filters are needed. Supplies in zip file here. http://www.ellies-treasures.com/files/tuts/scrap-rosalinde-supplies-psp.zip Supplies in psd format here if the psp tubes don't work for you. http://www.ellies-treasures.com/files/tuts/scrap-rosalinde-supplies-psd.zip ************* Credits I've included the woman's face tube that Violette used as well as the jpg I used in mine. Mine is from Ana Rasha and used with permission. The woman's face tube was made by Suzy Sgai and shared here with her permission to Violette. The scrap kit is supplied with permission to Violette by Gwyneth of Gwyn Grafica |
| Preparation Open your tubes, duplicate them (shift-D) and close the originals. I always open all of my tubes and close as I use them The tube used more than once here is the scrap kit. You can close the other one after using. I also keep a copy of the tag example open to refer to. Save mine from the top of the page and keep it open if you would like to do this. |
| 1. Open a transparent image large 700 x 600 pixels Selections>Select all |
| 2. Activate scrap kit Copy (control-C) raster 1 (heart paper) On your working canvas: edit>Paste into selection (control-shift-L) Deselect |
| 3. Return to your scrap kit Activate raster 2 (striped paper) -copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>80%, resize all layers not checked |
| 4. Effects>3D Effects>Drop shadow, following settings: use color #404040 (dark grey), 3/3/50/3 Effects>3D Effects>Drop shadow, following settings: use color #927168 (med rosy brown) -1/-1/50/2 |
| 5. To the scrap kit Activate raster 3 (brown love paper) -copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>80%, resize all layers not checked Give the same drop shadows as in step 4. |
| 6. Back to the scrap kit Activate raster 12 (stitching) - copy On your working canvas: edit>paste as new layer (control-L) Move to the up and left as shown, so it looks like brown paper is stitched to the striped Effects>3D Effects>Drop shadow, following settings: use color #927168 1/1/50/2 Layers>Duplicate Image>Mirror Image>Flip Redo drop shadow on this layer |
| 7. In your layer palette - activate layer 2 (striped paper) Layers>Duplicate Layers>Arrange>Bring to top Image>Resize>500 x 500 pixels - lock aspect ratio and resize all layers not checked Image>free rotate>45° to left, all layers not checked Effects>3D Effects>Drop shadow, following settings: color #927168 -1/-1/50/2 |
| 8. Back to the scrap kit Activate raster 4 (torn paper) - copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>80%, resize all layers not checked Image-Free rotate>45° to left Move it to the bottom left corner as shown, make sure it goes right to the corner and no paper is showing through right at the corner. Effects>3D Effects>Drop shadow, following settings: color #404040 2/2/50/2 |
| 9. Layers>Duplicate, Image>Mirror then Duplicate this layer and Image>Flip, duplicate this layer and Image>Mirror. You should now have it in all 4 corners. |
| 10. Back to the scrap kit Activate raster 17 (frame) - copy Edit>Paste as new image (control-V) With your magic wand select the inside of the frame Selections>Modify>Expand 1 pixel Layers>New raster layer. Fill with color #EFD8D1 (pale pink) Layers>Arrange>Send to the bottom Activate your lady tube - Copy Layers>New raster layer Edit>Paste into selection In the layer palette, change the blend mode to Luminance (Legacy) Deselect Layers>Merge>Merge visible Copy On your working canvas: edit>paste as new layer (control-L) Effects>3D Effects>Drop shadow, following settings: color #404040 1/1/50/2 |
| 11. Back to the scrap kit Activate raster 18 (heart and love ribbons) - copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>80%, resize all layers not checked Adjust>Sharpness>Sharpen (or Adjust>Sharpness>Unsharp Mask>1-64-4 Image>Free rotate>45° to the right Place the tube as shown Apply the same drop shadow as before. color #404040 1/1/50/2 |
|
12. Back to the scrap kit Activate raster 15 (arrow) - copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>90%, resize all layers not checked Adjust>Sharpness>Sharpen or Unsharp Mask as before Image>Mirror Image>Free rotate>60° to left Place the tube as shown Apply the same drop shadow as before. color #404040 1/1/50/2 |
|
13. Back to the scrap kit Activate raster 9 (double hearts) - copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>80%, resize all layers not checked Adjust>Sharpness>Sharpen (or unsharp mask) Place the tube up and right as shown, with the tip of the large heart touching the upper right corner of the frame Apply the same drop shadow as before. color #404040 1/1/50/2 |
|
14. Back to the scrap kit Activate raster 19 (bow) - copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>75%, resize all layers not checked Adjust>Sharpness>Sharpen (or unsharp mask) Place the tube as shown in left corner of lady's frame Apply the same drop shadow as before. color #404040 1/1/50/2 |
|
15. Back to the scrap kit Activate raster 10 (love word) - copy On your working canvas: edit>paste as new layer (control-L) Image>Resize>70%, resize all layers not checked Adjust>Sharpness>Sharpen More (or unsharp mask at 2-100-4) Image>Free rotate>30° to left Place the tube as shown to the left Apply the same drop shadow as before color #404040 1/1/50/2 Make sure all is where you want it. Layer palette, right click, Merge>Merge all |
|
16. Image>Add borders>2 pixels with color #927168 You're done! |
|
Resizing To keep the striped paper from going funny when resizing, resize at 85%, then repeat till it gets near the size you want. At that point you can resize normally.  If you resize, use the unsharp mask or Brightness/Contrast to sharpen it a bit. Adjust>Sharpness>Unsharp mask at Radius 1, strength 60, clipping 4. or Adjust>Brightness and Contrast set to Brightness of 5-contrast of 15. |
|
Watermark Layers>New raster layer. Add your water mark on this new layer Layers>Merge>Merge all (flatten) |
|
Save File>Export>Jpeg optimizer - compression of 20. |
| If you have any questions or suggestions, email me at this page: http://www.ellies-treasures.com/email/email.html |
| These tutorials are translated with permission from the original writer. Any resemblance to any other tutorial is purely coincidental and unintentional. Feel free to share any of my tutorials on this site by a link back to my site, but do not copy and send the entire tutorial to anyone or any group. ©2003-2007 Ellie's Treasures |
