Translated with permission from the creator, Lien at X-clusive Designz tutorial site.
 


See the original tutorial here for PSP in Dutch

 They will both open in a new window and print out on standard 8½" X 11" paper

For information about which fonts, programs, etc I used to construct my pages and my headers, click here.
For this tutorial you will need:
    or 
I've done this tutorial in both programs.
I believe it can be done in most versions.
You may have to look around for the commands but it's likely they are there.

Filters and materials needed
Eye Candy 3.1, available free here
Supplies in zip file here

From Lien: Important!!! Please read carefully!!!
* The scrap tubes used in this tutorial are bought by me personally. You may use these scrap elements for this tutorial,
and for your personal use. You may not offer these tubes for sale, trade, sharing, your own tutorials, or commercial purposes.
Read carefully the conditions of the scrap designers. If this rule is not observed I will have to stop writing scrap tutorials!!!
Thanks for your cooperation.

Concentration tube misted by Sugar

I am assuming you know the basics of Paint Shop Pro and where the tools can be located.
Here are some arrows and bars you can drag and drop where you need to mark or underline where you are. .
Just left click and drag to where you want it then let go.
They will stay where you put them until you close your browser.
           



Either install the font or double click to open the windows font viewer for it.
Leave it open and it will be available in the program.
Open up your tubes and pattern file. Minimize all till needed.
Each tube is only used once so you can close the tube files as you use them.
Step 1
Open a new transparent image 640 x 480 pix.
Step 2
Activate the tube LG-mem-rightside - copy (control-C), go to your working canvas,
paste as new layer (control-V). Move the tube entirely to the right.
Step 3
Activate the tube LG-mem-leftside - copy (control-C), go to your working canvas,
paste as new layer (control-V). Move the tube entirely to the left

Layers>Merge down (don't flatten or merge visible)
Step 4
Activate the tube LG-mem-background - copy (control-C), go to your working canvas,
paste as new layer (control-V). Move the tube a little to the left as shown.
Step 5
Activate the tube LG-mem-lace - copy (control-C), go to your working canvas,
paste as new layer (control-V). Move the tube to the left side of the left grey-blue strip, as shown

Layers>Duplicate

Image>Rotate>Flip Horizontal and move the tube to the right edge of the right grey blue strip
Layer>Arrange>Send backward, then move the lace on both sides till it's just peeking out
from behind the background tube. Do the same with the lace on the other side.
See my example. It's a bit hard to see along the right side, but it matches the left.


Here's a closeup

Highlight the top lace layer Layer>Merge down so both lace pieces are on one layer.
Step 6
Activate in your layer palette the upper layer.
Activate the tube LG-mem-stitches1 - copy, go to your working canvas, paste as new layer (control-V)
Move it to the right side of the left blue tubes edge according to my example.
Layer>Duplicate Layer. Image>Rotate>Flip Layer Horizontal. Move it into place on the right side.

Layer>Merge down
Step 7
Activate the tube LG-mem-tag - copy (control-C), go to your working canvas, paste as new layer (control-V)
Move the tube so it almost touches the bottom edge.
Step 8
Activate in your layer palette the upper layer.
Activate the tube LG-mem-stitches2 - go to your working canvas, paste as new layer (control-V)
Move it to the left side of the left blue edge as shown in my example.
Layers>Duplicate. Image>Rotate>Flip Layer Horizontal.
Move it into place on the right side, see my example

Layers - Merge down
Step 9
Activate the tube Concentration - copy (control-C), go to your working canvas, paste as new layer (control-V)
Move it up a bit, as shown here.
Step 10
Activate the tube LG-mem-frame - copy (control-C), go to your working canvas, paste as new layer (control-V)
Move it up so it frames the concentration tube, see example.
Step 11
Activate the tube LG-mem-heart - copy (control-C), go to your working canvas, paste as new layer (control-V)
Move the tube to the right as shown.
Step 12
Activate the tube LG-mem-corner - copy (control-C), go to your working canvas, paste as new layer (control-V)
Move the tube to the left top corner as shown. Place it so the
flat edges at the top and left are just touching the edges.
Step 13
Activate the tube LG-mem-flowertag - copy (control-C), go to your working canvas, paste as new layer (control-V)
Move the tube to the upper left corner as shown.
Image>Rotate>Free rotate layer. Hover with your cursor at the bottom right and you'll see a curved arrow.
Click down there and holding the left mouse button down, turn the tube slightly up anti-clockwise (up)
Click on the little check mark to finish. In PSE it's at the bottom of your image, in PS it's in the toolbar far right.
Step 14 - Adding text
Activate the text tool and pick the font Agatha (in zip). Use a size that would fit your text on the tag
(I used size 30 pts), foreground color #282116 (almost black), If your text color doesn't change to the right one, click on the little arrows right above the color palette to switch the colors.
Switch them once and then again and the right color should be the showing in the text toolbar.




If your text is on two lines, it's better to do them separately so you can move them closer together.
Image>Rotate>Free rotate layer and rotate the text up
on the right side, counterclockwise, in alignment with the tag.
In PSE: in your styles palette, click on layer styles-drop shadows and double click on Low.

Now go to Layer>Layer Styles>Style settings. Change the size and distance to 1.
Step 15
Check if everything is placed properly.
Layer>Flatten Image
Image>Resize - 90%.

Enhance>Unsharp mask with the settings: amount 64 - radius 1 - threshold 4.
Step 16
Right click on your canvas title bar>Canvas size - 6 pix
(to get 3 pix all the way around- you always double the amount you want to increase by),
color #f2f0e5 (pale grey), relative clicked

Select the edge with your magic wand, tolerance at 0, anti-alias checked.


Go to Filter>Eye Candy 3.1>Inner Bevel and use these settings
3, Flat, 6, 11, 18, 16, 135, 45



Select>Deselect
Step 17
Right click on your canvas title bar>Canvas size - 7 pix (so you enter 14 for H and W), color #3a4353
Right click on your canvas title bar>Canvas size - 15 pix (so you enter 30 for H and W), color #f2f0e5
Select the edge with your magic wand.
Open your memories pattern (patroon). Control-A to select all.
Go to Edit>Define Pattern from Selection, and give it a name.

Now go to Edit>Fill Selection, find the pattern you just defined and click ok.
Keep selected



Go to Filter>Eye Candy 3.1>Inner Bevel and use these settings
15, Flat, 10, 7, 18, 16, 135, 45


Select>Deselect

You're done!
Step 18 - Watermark and merge all (flatten)
Step 19 - Save
I usually save at 8 (medium)
l hope you had fun!
Back to top
If you have any questions or suggestions, click on the email button below to contact me. Have a wonderful day!
These tutorials are translated with permission from the original writer.
Any resemblance to any other tutorial is purely coincidental and unintentional.
Feel free to share any of my tutorials on this site by a link back to my site,
but do not copy and send the entire tutorial to anyone or any group.
©2003-2007 Ellie's Treasures


Back to top

Webpage Design Information
This webpage background was made in PhotoImpact with a tutorial by Deb DeHaven
 Sadly, she passed away but her tutorials just came back online, thanks to PIRCNet.
You can find the tutorial here.
 The font I used for all of the text on the buttons is BrockScript
The font I used for the "Memories" tutorial header is Agatha.
 Click on the font name to download the font.
I use PhotoImpact to make all of my headers due to the amazing
3D text it has and the wonderful presets available free online
 Most of the presets I use are either the ones that come with PhotoImpact, usually the Gel ones,
or from Deb's PI Tutorials and More (see below) or Carol Oyl's site
 This is the address to Deb's old pages
 http://www.fortunecity.com/skyscraper/millenit/1716/pitutorials/objects/presets/presets1.html
 I can't find any links to her new pages but the presets are still on this page for download.
 For more sites to find PI Presets, take a look at my Great Beginnings page.